MIM Products Material Characteristics
| Material mark |
Material Category |
Chemical Ingredients wt% |
Density | Tensile Strength MPa |
Expansion % | Hardness HR | Other Characteristics |
Example Use |
JIS Z2550 Equivalent Grade |
|||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Fe | C | Cu | Ni | Mo | Cr | Other | g/cm3 | Pre- hardening |
Post- hardening |
Pre- hardening |
Post- hardening |
Pre- hardening |
Post- hardening |
Old (1989) |
New (2016) |
|||||
| PMF01 | General structural material |
Residual | 0.3~0.5 | - | 1.5~2.5 | - | - | - | ≦1 | ≧7.5 | ≧450 | ≧1200 | ≧15 | ≧3 | ≧60HRB | 40HRC | - | Gears, cams, couplings, general structural components |
JPMA S01:2005 MIM-Fe2Ni |
|
| PMF02 | Residual | 0.3~s0.5 | - | 1.5~2.5 | ~1 | - | - | ≦1 | ≧7.5 | ≧550 | ≧1300 | ≧10 | ≧2 | ≧80HRB | 50HRC | - | - | |||
| PMS11 | Corrosion- resistant material |
Residual | ≦0.03 | - | 12~15 | 2~3 | 16~18 | - | ≦1 | ≧7.5 | ≧450 | - | ≧40 | - | - | - | - | Gears, cams, corrosion-resistant high-strength components |
JPMA S01:2005 MIM-SUS316L |
|
| PMS21 | Residual | ≦0.07 | - | 3~5 | - | 15~18 | Cu:3.5 | ≦4 | ≧7.5 | - | ≧1200 | - | ≧9 | - | ≧40HRC | - | Gears, cams, corrosion-resistant high-strength components |
JPMA S01:2005 MIM-SUS630 |
||
| PMM11 | Magnetic material |
Residual | ≦0.03 | - | - | - | - | Co:48~50 V:~3 |
≦1 | ≧7.8 | - | - | - | - | - | - | B25：≧1.95T Nc μmax：≧2000 |
Soft magnetic components |
Permendur | |
| PMM21 | Residual | ≦0.03 | - | 46~48 | - | - | - | ≦1 | ≧7.8 | - | - | - | - | - | - | B25：≧1.4T μmax：≧28000 |
PB permalloy | |||
